LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Manual Transaxle (Service Information)) >> Revolution Sensor Removal/Installation >> Revolution Sensor Installation Note

Revolution Sensor Installation Note

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean revolution sensor and the revolution sensor installation hole.
    NOTE:
    • Do not apply manual transaxle oil to the O-ring.
  2. Apply manual transaxle oil to the revolution sensor installation hole.
  3. Install a new O-ring to revolution sensor.
  4. Install revolution sensor and the O-ring as a single unit.
scientia non olet · About LEMON Manuals