LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Splash Shield Removal/Installation >> Front Splash Shield

Front Splash Shield

  1. Remove the fasteners shown in the figure and slightly bend back the front mudguard.
    G13179318
  2. Remove the bolts and fastener.

    LH 

    Fig 1: Front Under Cover No.2, Fastener And Bolts With Torque Specification (LH)
    G13179319

    RH 

    Fig 2: Front Under Cover No.2, Fastener And Bolts With Torque Specification (RH)
    G13179320
  3. Partially peel back the front under cover No.2.
  4. Remove the screw.
    G13179321
  5. Remove the fasteners.
    G13179322
  6. Remove the front splash shield.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals