LF Control Unit Inspection [(Us)]: Notes
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
- Remove the front side trim. (See LF CONTROL UNIT REMOVAL/INSTALLATION .)
- Connect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
- Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (See Terminal voltage table (reference) .)
- If the voltage is not as specified in the terminal voltage table (See Terminal voltage table (reference) .), inspect the parts under Inspection item(s).
- If the system does not work normally even though the inspection items are normal, replace the LF control unit.
- If the voltage is not as specified in the terminal voltage table (See Terminal voltage table (reference) .), inspect the parts under Inspection item(s).