LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> MX-5 Miata RF Club, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Entertainment System) >> AudioPilot® MICROPHONE REMOVAL/INSTALLATION

AudioPilot® MICROPHONE REMOVAL/INSTALLATION

WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • AudioPilot® is a registered trademark of Bose® Corporation.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Scuff plate (passenger's side) (See SCUFF PLATE REMOVAL/INSTALLATION .)
    2. Front side trim (passenger's side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    3. A-pillar trim (passenger's side) (See A-PILLAR TRIM REMOVAL/INSTALLATION .)
    4. Passenger-side lower panel (See PASSENGER-SIDE LOWER PANEL REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    Fig 1: Removing AudioPilot® Microphone And Screw
    G10954947Courtesy of MAZDA MOTORS CORP.
  4. Remove the screw.
  5. Remove the AudioPilot® microphone.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals