LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> MX-5 Miata RF Club, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Drive Selection System) >> Drive Selection Switch Removal/Installation >> Notes

Drive Selection Switch Removal/Installation: Notes

WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the selector lever knob. (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION .)
  3. Remove the shift panel component. (See SHIFT PANEL REMOVAL/INSTALLATION .)
  4. Remove the upper panel. (See UPPER PANEL REMOVAL/INSTALLATION .)
  5. Remove in the order indicated in the table.
  6. Install in the reverse order of removal.
    Fig 1: Measuring Resistance Between Drive Selection Switch Terminals B And C - Drive Selection Switch Pressed To Side (Backward) And Held
    G10951946Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals