Leaving Home Light System
WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- There are three methods for personalizing the leaving home light system: Using the M-MDS, using the center display (with center display), and using the light switch.
Using M-MDS
- CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE
Using center display
- CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE
Using dimmer switch
- Switch the ignition off.
CAUTION:- Perform the procedure in Steps 2-4 within 10 s.
- Operate the dimmer switch to the passing position and wait for 3 s or more.
- Operate the dimmer switch back to the LO position.
- Operate the dimmer switch to the passing position and wait for 3 s.
- Verify that the headlight high-beam indicator light flashes two times.
- If the headlight high-beam indicator light does not flash two times, the procedure may have been performed incorrectly. Repeat the procedure from Step 2.