LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> MX-5 Miata RF Club, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Charging System) >> Generator Disassembly/Assembly >> Brush Assembly Note

Brush Assembly Note

WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Melt the solder quickly, otherwise the diodes (rectifier) and regulator will be damaged by excessive heat.
Fig 1: Identifying Regulator Component And Soldered Area (Brush Assembly)
G10951912Courtesy of MAZDA MOTORS CORP.
  1. Press the brush into the regulator component with it facing in the direction shown in the figure.
    Fig 2: Identifying Brush And Regulator Component
    G10951913Courtesy of MAZDA MOTORS CORP.
  2. Solder the brush to the regulator component.
scientia non olet · About LEMON Manuals