Front Stabilizer Bracket Installation Note
- If the front stabilizer bracket cannot be installed by hand, install it using a vise.CAUTION:
- The front stabilizer bracket may be deformed if it is installed using a vise. When installing the front stabilizer bracket using a vise, set the cylinder-shaped parts as shown in the figure so that pressure is applied to the front stabilizer bracket flange, and install the front stabilizer bracket to the front stabilizer bushing.
- After installing the front stabilizer bracket, verify that the positions of the front stabilizer bracket and the front stabilizer bushing are within the range shown in the figure.
H1: 6.5 mm {0.26 in} max.
H2: 6.5 mm {0.26 in} max.