LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Security And Locks) >> Security And Locks Personalization Features Setting Procedure >> Advanced Keyless Entry System >> Setting method by operation of remote transmitter button

Setting method by operation of remote transmitter button

WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. The following setting can be changed by operation of the remote transmitter button.
    M-MDS display Function Initial setting Setting contents Control unit
    Keyless Lock Beep Volume. The keyless beeper volume can be adjusted. Medium Off/Low/Medium/High Start stop unit
  2. Change the setting for the keyless beeper volume referring to the following procedure:
    NOTE:
    • If any of the following conditions is met during procedure, the setting for changing the keyless beeper volume is finished.
      • The ignition is switched to ACC or ON (engine off or on).
      • The driver's door is closed.
      • The liftgate is open.
      • The remote transmitter operation is not performed for approx. 10 s.
      • The UNLOCK button on the remote transmitter is pressed.
      • A request switch is pressed.
Fig 1: Remote Transmitter Button Setting Method Troubleshooting Chart
G10954364Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals