Adjusting Cam Bolt Installation Note
WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front lower arm to the front crossmember and insert the new adjusting cam bolts in the directions indicated as follows.
- Vehicle front: Insert adjusting cam bolt from vehicle rear
- Vehicle rear: Insert adjusting cam bolt from vehicle front
- Point the calibration marking on the adjusting cam bolt and cam plate towards the underside of the vehicle.
- Tighten the new nut to the specified torque.
Tightening torque
- 135-165 N.m {14-16 kgf.m, 100-121 ft.lbf}