DSC Operates Frequently/DSC Does Not Work Correctly: Notes
DYNAMIC STABILITY CONTROL OPERATES FREQUENTLY/DYNAMIC STABILITY CONTROL DOES NOT WORK CORRECTLY (DYNAMIC STABILITY CONTROL) POSSIBLE CAUSE
| 6 |
DSC*2
operates frequently
DSC does not work correctly
*2
: TCS/DSC indicator light turns on and off while DSC operates |
| POSSIBLE CAUSE |
- DSC HU/CM detected malfunction. (Input and output device malfunction)
- Poor installation with SAS control module (yaw rate sensor, low-G sensor) (If SAS control module is poorly installed, DSC may operate intermittently.)
- There is a difference in condition or air pressure between front or rear tires.
- When replacing DSC HU/CM and SAS control module, initialization is not performed. (If initialization is not performed correctly, DSC may not work correctly.)
|