DSC HU/Cm Inspection
- Disconnect the DSC HU/CM connector. (See DSC HU/CM REMOVAL/INSTALLATION .)
- Measure the voltage or continuity of the DSC HU/CM wiring harness-side connector using a tester.
Terminal Voltage Table (Reference)
TERMINAL VOLTAGE SPECIFICATION
| Terminal | Connected to | Measured item | Test condition or measured terminal | Specification (Reference) | Inspection item | ||
|---|---|---|---|---|---|---|---|
| A | Battery | Voltage | Under any condition | B+ |
|
||
| B | Battery | Voltage | Under any condition | B+ |
|
||
| C | CAN related module | Because this terminal is for communication, determination using terminal voltage inspection is not possible. Perform the inspection using the DTC inspection. | |||||
| D | CAN related module | Because this terminal is for communication, determination using terminal voltage inspection is not possible. Perform the inspection using the DTC inspection. | |||||
| E | - | - | - | - | - | ||
| F | - | - | - | - | - | ||
| G | - | - | - | - | - | ||
| H | - | - | - | - | - | ||
| I | IG1 relay | Voltage | Ignition off | 1.0 V or less |
|
||
| Ignition ON (engine off) | B+ | ||||||
| J | RF ABS wheel-speed sensor | Continuity | DSC HU/CM terminal J- RF ABS wheel-speed sensor terminal B | Continuity detected |
|
||
| K | RF ABS wheel-speed sensor | Continuity | DSC HU/CM terminal K-RF ABS wheel-speed sensor terminal A | Continuity detected |
|
||
| L | RR ABS wheel-speed sensor | Continuity | DSC HU/CM terminal L-RR ABS wheel-speed sensor terminal B | Continuity detected |
|
||
| M | RR ABS wheel-speed sensor | Continuity | DSC HU/CM terminal M-RR ABS wheel-speed sensor terminal A | Continuity detected |
|
||
| N | - | - | - | - | - | ||
| O(1) | Brake light relay | Voltage | Brake pedal depressed | B+ |
|
||
| Brake pedal released | 1.0 V or less | ||||||
| P | LR ABS wheel-speed sensor | Continuity | DSC HU/CM terminal P-LR ABS wheel-speed sensor terminal B | Continuity detected |
|
||
| Q | - | - | - | - | - | ||
| R | LR ABS wheel-speed sensor | Continuity | DSC HU/CM terminal R-LR ABS wheel-speed sensor terminal A | Continuity detected |
|
||
| S | LF ABS wheel-speed sensor | Continuity | DSC HU/CM terminal S-LF ABS wheel-speed sensor terminal B | Continuity detected |
|
||
| T | - | - | - | - | - | ||
| U | - | - | - | - | - | ||
| V | - | - | - | - | - | ||
| W | LF ABS wheel-speed sensor | Continuity | DSC HU/CM terminal W-LF ABS wheel-speed sensor terminal A | Continuity detected |
|
||
| X | - | - | - | - | - | ||
| Y | - | - | - | - | - | ||
| Z | - | - | - | - | - | ||
| AA | - | - | - | - | - | ||
| AB | - | - | - | - | - | ||
| AC | - | - | - | - | - | ||
| AD | - | - | - | - | - | ||
| AE | - | - | - | - | - | ||
| AF | - | - | - | - | - | ||
| AG | - | - | - | - | - | ||
| AH | - | - | - | - | - | ||
| AI | - | - | - | - | - | ||
| AJ | - | - | - | - | - | ||
| AK | Ground point | Continuity | DSC HU/CM terminal AK-ground point | Continuity detected |
|
||
| AL | Ground point | Continuity | DSC HU/CM terminal AL-ground point | Continuity detected |
|
||
|
|||||||