Setting method by operation of remote transmitter button
- The following setting can be changed by operation of the remote transmitter button.
SETTING METHOD BY OPERATION OF REMOTE TRANSMITTER BUTTON FUNCTION DESCRIPTION
| Function |
Initial setting |
Setting content |
Control unit |
| 2-step unlocking function. |
ON |
OFF/ON |
Start stop unit |
- Change the setting for the 2-step unlocking function referring to the following procedure:
NOTE:
- If any of the following conditions is met during procedure, the setting for changing the 2-step unlocking function is finished.
- The ignition is switched to ACC or ON (engine off or on).
- The driver's door is closed.
- The trunk lid is open.
- The remote transmitter operation is not performed for approx. 10 s.
- The lock button on the remote transmitter is pressed.
- A request switch is pressed.
 Courtesy of MAZDA MOTORS CORP.
|