LF Control Unit Inspection: Notes
- Remove the scuff plate (RH). (See SCUFF PLATE REMOVAL/INSTALLATION
.)
- Remove the front side trim (RH). (See FRONT SIDE TRIM REMOVAL/INSTALLATION
.)
- Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference).
- If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.
- If the system does not work normally even though the inspection items or related wiring harnesses do not have any malfunction, replace the LF control unit. (See LF CONTROL UNIT REMOVAL/INSTALLATION .)