Diagnostic procedure
WARNING: This page is about a different variant/trim than selected.
DTC P187B:00 (AWD CONTROL MODULE) DIAGNOSTIC PROCEDURE
| Step | Inspection | Results | Action |
|---|---|---|---|
| 1 | INSPECT EACH TIRE DIAMETER
|
Yes | Go to the next step. |
| No | Replace with specified tire. | ||
| 2 | VERIFY DTC TROUBLESHOOTING COMPLETED
|
Yes | Replace the AWD control module, then go to the next step. (See AWD CONTROL MODULE REMOVAL/INSTALLATION .) |
| No | Go to the next step. | ||
| 3 | VERIFY NO DTC IS PRESENT
|
Yes | Go to the applicable DTC inspection. (See DTC TABLE [AWD CONTROL MODULE] .) |
| No | DTC troubleshooting completed. |