LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-9 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Engine Starting System) >> Starter Removal/Installation >> Terminal B Cable Disconnection Note

Terminal B Cable Disconnection Note

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the two bolts shown in the figure.
    Fig 1: Wiring Harness Bracket, Starter And Bolts
    G11433356Courtesy of MAZDA MOTORS CORP.
  2. Set aside the wiring harness and wiring harness bracket as a single unit.
  3. Disconnect the terminal B cable.
scientia non olet · About LEMON Manuals