LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-9 Touring, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> Engine Removal/Installation >> No. 1 Engine Mount Rubber, Front Crossmember Component Removal Note

No. 1 Engine Mount Rubber, Front Crossmember Component Removal Note

  1. Loosen the No. 1 engine mount rubber installation bolt (front crossmember side) shown in the figure.

    2WD 

    G11436682Courtesy of MAZDA MOTORS CORP.

    AWD 

    G11436683Courtesy of MAZDA MOTORS CORP.
  2. Remove the No. 1 engine mount rubber and the front crossmember component as a single unit. (See FRONT CROSSMEMBER REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals