LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-9 Touring, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Rear Scuff Plate Removal/Installation >> Installation

Rear Scuff Plate Removal/Installation: Installation

  1. Align the rear scuff plate pins shown in the figure with the inner panel.
    G11435005Courtesy of MAZDA MOTORS CORP.
  2. Press the rear scuff plate in the direction of arrow (1) shown in the figure and install tab B to the trunk side trim.
    G11435006Courtesy of MAZDA MOTORS CORP.
  3. Press the rear scuff plate in the direction of arrow (2) shown in the figure and install tab B to the B-pillar lower trim.
  4. Press the rear scuff plate in the direction of arrow (1) shown in the figure and install the clip to the inner panel.
    G11435007Courtesy of MAZDA MOTORS CORP.
  5. Press the rear scuff plate in the direction of arrow (2) shown in the figure and install the clip to the inner panel.
  6. Press the rear scuff plate in the direction of arrow (3) shown in the figure and install the clip to the inner panel.
  7. Press the rear scuff plate in the direction of arrow (1) shown in the figure and install tab A to the trunk side trim.
    G11435008Courtesy of MAZDA MOTORS CORP.
  8. Press the rear scuff plate in the direction of arrow (2) shown in the figure and install tab A to the B-pillar lower trim.
scientia non olet · About LEMON Manuals