LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Engine Mechanical System) >> Idler Disassembly/Assembly >> Snap Ring Removal/Installation Note

Snap Ring Removal/Installation Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove/install the snap ring using snap ring pliers.
Fig 1: Installing Snap Ring Using Snap Ring Pliers
G11550140Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals