LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Instrumentation/Driver Info) >> Parking Sensor Control Module Removal/Installation

Parking Sensor Control Module Removal/Installation

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    Fig 1: Parking Sensor Control Module, Connector And Nuts With Torque Specification
    G11434833Courtesy of MAZDA MOTORS CORP.
  4. Remove the nuts.
  5. Remove the parking sensor control module.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals