Using the M-MDS

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.

Connect the M-MDS to the DLC-2.
After vehicle identification, select the following from the M-MDS initialization screen.
1. "Data logger"
2. "Module"
3. "HUD"
Using the simulation function MAINT_MODE, verify that the display screen of the active driving display changes.

Fig 1: Screen Display - Active Driving Display Changes

Courtesy of MAZDA MOTORS CORP.

If the display screen for the active driving display cannot be changed, refer to the symptom troubleshooting. (See SYMPTOM TROUBLESHOOTING [INSTRUMENT CLUSTER] .)