LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Exterior Trim) >> Side Step Molding Installation

Side Step Molding Installation

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the clips to the side step molding.
    Fig 1: Installing Clips To Side Step Molding
    G11431255Courtesy of MAZDA MOTORS CORP.
  2. Press the side step molding in the direction of the arrow shown in the figure and install clip.
    Fig 2: Pressing Side Step Molding
    G11431256Courtesy of MAZDA MOTORS CORP.
  3. Press the side step molding in the direction of the arrows shown in the figure and install clips.
    Fig 3: Installing Side Step Molding Clips
    G11431257Courtesy of MAZDA MOTORS CORP.
  4. Press the side step molding in the direction of the arrow shown in the figure and install tab.
    Fig 4: Pressing Side Step Molding
    G11431258Courtesy of MAZDA MOTORS CORP.
  5. Install the front over fender. (See FRONT OVER FENDER REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals