LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Drive Axle Shaft) >> Rear Drive Shaft Removal/Installation >> Locknut Installation Note

Locknut Installation Note

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. After tightening the locknut once at a torque of 100-150 N.m {11-15 kgf.m, 74-110 ft.lbf}, loosen it 180 degrees once, and then retighten it at a torque of 236-274 N.m {25-27 kgf.m, 175-202 ft.lbf}.
scientia non olet · About LEMON Manuals