Front Stabilizer Control Link Inspection: Notes
WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front stabilizer control link. (See FRONT STABILIZER REMOVAL .) (See FRONT STABILIZER INSTALLATION .)
- Inspect the front stabilizer control link for bends or damage.
- If there is any malfunction, replace the front stabilizer control link. (See FRONT STABILIZER REMOVAL .) (See FRONT STABILIZER INSTALLATION .)
- Rotate the front stabilizer control link ball joint stud 10 times and shake it side to side 10 times.
- Install a hexagonal wrench to the front stabilizer control link ball joint stud, and measure the starting torque of the front stabilizer control link ball joint using a torque wrench.