Ignition coil/ion sensor Removal Note

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the connector and hoses shown in the figure.

Fig 1: Purge Solenoid Valve Component, Connector And Hose (Vacuum Pipe Side)
Courtesy of MAZDA MOTORS CORP.
Remove the bolts shown in the figure.

Fig 2: Purge Solenoid Valve Component And Bolts
Courtesy of MAZDA MOTORS CORP.
Set the purge solenoid valve component aside as shown in the figure.

Fig 3: Removing Purge Solenoid Valve Component
Courtesy of MAZDA MOTORS CORP.
Remove the ignition coil/ion sensors.