LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine Control System) >> Barometric Pressure (BARO) Sensor Removal/Installation

Barometric Pressure (BARO) Sensor Removal/Installation

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The BARO sensor is built into the PCM. When replacing the BARO sensor, replace the PCM.
  1. Remove the PCM. (See PCM REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals