LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Automatic Transaxle Shift Mechanism) >> Selector Lever Inspection

Selector Lever Inspection

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch the ignition ON (engine off or on).
  2. Perform the following procedures to inspect the selector lever.
    • If there is any malfunction, adjust the selector cable. (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
      1. Verify that the selector lever can be operated as shown in the figure.
        Fig 1: Selector Lever Operation Sequence
        G11539724Courtesy of MAZDA MOTORS CORP.
      2. Verify that the selector lever can be operated smoothly and moderately.
scientia non olet · About LEMON Manuals