Simulation item table

SIMULATION PART DESCRIPTION

Item	Definition	Unit	Operation	Other condition
EVAPCP	Purge solenoid valve control signal	%	Changes % and forcibly drives/stops purge solenoid valve.	Under the following conditions: Override drive parameter input range: 0-100%
INJ_1	Fuel injector No. 1	OFF	Select OFF to forcibly stop fuel injector No. 1.	WARNING: Do not use the simulation function while the vehicle is being driven. Stopping the fuel ejection causes the engine to stall which may cause the brakes to not function.
INJ_2	Fuel injector No. 2	OFF	Select OFF to forcibly stop fuel injector No. 2.
INJ_3	Fuel injector No. 3	OFF	Select OFF to forcibly stop fuel injector No. 3.
INJ_4	Fuel injector No. 4	OFF	Select OFF to forcibly stop fuel injector No. 4.