LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System >> Engine Oil Solenoid Valve Removal/Installation >> Bolt Removal Note

Bolt Removal Note

  1. Cover the area around the engine oil solenoid valve with a cloth because a small amount of engine oil will leak from the engine oil solenoid valve installation area.
    CAUTION:
    • Do not let any leaked engine oil contact the adjacent water pump gasket and O-ring of the water inlet pipe. Otherwise, the gasket could swell causing a seal malfunction.
  2. Remove the bolts shown in the figure.
    G11436469Courtesy of MAZDA MOTORS CORP.
    CAUTION:
    • When removing the engine oil solenoid valve component, be careful not to apply excessive force to the oil pipe protector because it may deform the oil pipe protector.
  3. Remove the wiring harness clips and connector shown in the figure.
    G11436470Courtesy of MAZDA MOTORS CORP.
  4. Remove the bolts shown in the figure.
    G11436471Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals