LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security And Locks >> Immobilizer System-Related Parts Programming >> No. 3 Programming Procedure When Start Stop Unit Is Replaced Or When Start Stop Unit And PCM Are Replaced Simultaneously >> Notes

No. 3 Programming Procedure When Start Stop Unit Is Replaced Or When Start Stop Unit And PCM Are Replaced Simultaneously: Notes

CAUTION:
  • The engine cannot be started if any step or procedure is skipped. Perform all procedures in the order of the steps.
  • Because it is necessary to program two or more remote transmitters to the immobilizer system related parts to start the engine, perform the remote transmitter programming after clearing the remote transmitter.
NOTE:
  • Before beginning the procedure, verify that the customer has provided all of the remote transmitters for the vehicle.
  • The engine cannot be started unless two or more remote transmitters are programmed after the replacement.
scientia non olet · About LEMON Manuals