Sunroof System Initialization Procedure
WARNING: This page is about a different car, the 2017 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Performing the following procedures will reset the initial settings and disable operations other than the tilt-up operation. Re-perform the initial setting.
- Negative battery terminal is disconnected. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Sunroof switch connector is disconnected.
- Sunroof system power supply fuse is removed.
- Switch the ignition ON (engine off or on).
- Press the tilt-up switch and tilt-up the glass panel completely.