LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-5 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Dynamic Stability Control System (Service Information)) >> Rear Abs Wheel-Speed Sensor Removal/Installation [2WD] >> Grommet Removal Note

Grommet Removal Note

WARNING: This page is about a different car, the 2017 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cap nuts.
    Fig 1: Removing Cap Nuts
    G11427003Courtesy of MAZDA MOTORS CORP.
  2. Partially peel back the rear mudguard and remove the grommet.
scientia non olet · About LEMON Manuals