LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-5 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Dynamic Stability Control System (Service Information)) >> DSC HU/Cm Inspection >> Notes

DSC HU/Cm Inspection: Notes

WARNING: This page is about a different car, the 2017 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the DSC HU/CM connector. (See DSC HU/CM REMOVAL/INSTALLATION .)
  2. Connect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Attach the tester lead to the DSC HU/CM wiring harness-side connector and inspect voltage, continuity, or resistance according to the standard (reference) on the table.
scientia non olet · About LEMON Manuals