LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-5 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Security And Locks) >> Immobilizer System-Related Parts Programming >> No. 3 Programming Procedure When Start Stop Unit Is Replaced Or When Start Stop Unit And Pcm Are Replaced Simultaneously >> Notes

No. 3 Programming Procedure When Start Stop Unit Is Replaced Or When Start Stop Unit And Pcm Are Replaced Simultaneously: Notes

WARNING: This page is about a different car, the 2017 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • The engine cannot be started if any step or procedure is skipped. Perform all procedures in the order of the steps.
  • Because it is necessary to program two or more remote transmitters to the immobilizer system-related parts to start the engine, perform the remote transmitter programming after clearing the remote transmitter.
NOTE:
  • Before beginning the procedure, verify that the customer has provided all of the remote transmitters for the vehicle.
  • The engine cannot be started unless two or more remote transmitters are programmed after the replacement.
scientia non olet · About LEMON Manuals