LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-5 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Security And Locks) >> Push Button Start Inspection >> LED Illumination Inspection

LED Illumination Inspection

WARNING: This page is about a different car, the 2017 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the lower decoration panel. (See DECORATION PANEL REMOVAL/INSTALLATION .)
  3. Remove the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION .)
  4. Apply battery positive voltage and connect the ground to the push button start terminals and verify that the LED illuminates as indicated in the table.
Fig 1: Applying Battery Positive Voltage To Push Button Start
G11273557Courtesy of MAZDA MOTORS CORP.
Fig 2: Push Button Start Terminal Chart
G11273558Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals