Fuel Tank Pressure Sensor Inspection: Standard
WARNING: This page is about a different variant/trim than selected.
STANDARD VOLTAGE SPECIFICATION
| Applied pressure | EVAP_PRES |
|---|---|
| kPa {kgf/cm2 , psi}* | V |
| Approx. -2.5 {-0.025, -0.36} | Approx. 1.2 |
| Approx. 0 {0, 0} | Approx. 2.6 |
| Approx. +3.5 {+0.036, +0.51} | Approx. 4.6 |
- If not as verified, replace the pressure control valve. (See PRESSURE CONTROL VALVE REMOVAL/INSTALLATION .)