LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Body Panels) >> Set Plate Removal/Installation

Set Plate Removal/Installation

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear under cover. (See REAR UNDER COVER REMOVAL/INSTALLATION .)
  2. Remove the bolts.
    Fig 1: Set Plate Bolts With Torque Specification
    G13178543Courtesy of MAZDA MOTORS CORP.
  3. Pull the set plate in the direction of the arrows shown in the figure while detaching the clips.
    G13178544Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals