LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Body Panels) >> Intake Air Guide Removal/Installation >> Intake Air Guide (Upper)

Intake Air Guide (Upper)

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
  2. Remove the upper face. (See UPPER FACE REMOVAL/INSTALLATION [(US)] .)
  3. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION [(US)] .)
  4. Remove the fasteners shown in the figure.
    G13178510Courtesy of MAZDA MOTORS CORP.
  5. Remove the intake air guide (upper) in the direction of the arrows shown in the figure while detaching the tabs.
    G13178511Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
  7. Perform the 360° view monitor system aiming. (with 360° view monitor system) (See 360°VIEW MONITOR SYSTEM AIMING .)
  8. Perform the front radar sensor aiming adjustment. (with front radar sensor) (See FRONT RADAR SENSOR AIMING .)
  9. Perform the front side radar sensor aiming adjustment. (with front side radar sensor) (See FRONT SIDE/REAR SIDE RADAR SENSOR AIMING .)
scientia non olet · About LEMON Manuals