LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-3 FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Drive Selection System >> Drive Selection Switch Removal/Installation >> Without Electric Parking Brake

Without Electric Parking Brake

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Center console tray (See CENTER CONSOLE TRAY REMOVAL/INSTALLATION .)
    2. Shift bezel (See SHIFT BEZEL REMOVAL/INSTALLATION .)
    3. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION .)
    4. Selector lever knob (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
    5. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    G11435663Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals