Diagnostic Procedure
WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | INSPECT LF CONTROL UNIT
|
Yes | Go to the next step. |
| No | Replace the LF control unit, then go to the next step. (Refer to LF CONTROL UNIT REMOVAL/INSTALLATION .) |
||
| 2 | VERIFY THAT REPAIRS HAVE BEEN COMPLETED
|
Yes | Replace the start stop unit, then go to the next step. (Refer to START STOP UNIT REMOVAL/INSTALLATION .) |
| No | Go to the next step. | ||
| 3 | VERIFY IF OTHER DTCs DISPLAYED
|
Yes | Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (Refer to DTC TABLE [ADVANCED KEYLESS ENTRY SYSTEM] .) |
| No | DTC troubleshooting completed. | ||