LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-3 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Drive Axle Shaft) >> Rear Drive Shaft Disassembly/Assembly >> Boot Band Disassembly Note

Boot Band Disassembly Note

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a screwdriver and hammer, lightly tap the lever of the boot band to disconnect the lock clip.
    Fig 1: Tapping Boot Band Lever Using Hammer
    G10909493Courtesy of MAZDA MOTORS CORP.
  2. Remove the boot band using pliers.
Fig 2: Removing Boot Band Using Pliers
G10909494Courtesy of MAZDA MOTORS CORP.