DTC U1A4B-54: Radar Aiming Is Not Performed: Notes
WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- When replacing a blind spot monitoring (BSM) control module (RH) having any of the following part numbers, it is necessary to replace the blind spot monitoring (BSM) control module (LH) at the same time to perform the configuration normally.
- DB2R-67Y80
- DB2R-67Y80 A
| Description | Radar aiming is not performed or radar sensor axis is deviated (Blind spot monitoring (BSM) control module (RH) |
|---|---|
| Detection condition |
|
| Fail-safe |
|
| Possible cause |
|
| System wiring diagram | Not applicable |