DTC U0515-68: Error Signal Received From Start Stop Unit: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.

Description	Error signal received from start stop unit
Detection condition	Blind spot monitoring (BSM) control module (LH) receives the error signal from the start stop unit for 2 s or more with the ignition switched ON (engine off or on).
Fail-safe	Blind spot monitoring (BSM) system is stopped.
Possible cause	DTCs are stored in the start stop unit. Start stop unit malfunction DTCs are stored in the instrument cluster. Instrument cluster malfunction Blind spot monitoring (BSM) control module (LH) malfunction
System wiring diagram	Not applicable