Rear Wheel Alignment Specification - Unloaded *1 (2Wd)
WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
REAR WHEEL ALIGNMENT SPECIFICATION - UNLOADED *1 (2WD)
| Item | Fuel gauge indication | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Empty | 1/4 | 1/2 | 3/4 | Full | |||||||
| Total toe-in | Tire [Tolerance ±5 {0.2}] |
(mm) | 4.4 {0.173} | ||||||||
| Rim inner [Tolerance ±4 {0.2}] |
Vehicle equipped with 16 inch wheel: 2.7 {0.106} Vehicle equipped with 18 inch wheel: 3.0 {0.118} |
||||||||||
| (degree) | 0°23'±0°22' | ||||||||||
| Camber angle(2) (Reference value) [Tolerance ±1°] |
-1°34' | -1°34' | -1°35' | -1°35' | -1°35' | ||||||
| Thrust angle (Reference value) [Tolerance ±0°48'] |
0°00' | ||||||||||
|
|||||||||||