DTC C0051-95: Steering Angle Sensor Assembly Malfunction: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.

Description	Steering angle sensor assembly malfunction
Detection condition	Start stop unit receives the following signals with the ignition switched ON (engine off or on). Steering angle sensor assembly malfunction from EPS control module for 1 s or more Improper assembly of steering angle sensor at 360° Steering wheel angle of 720° or more for 0.048 s or more
Fail-safe	Not applicable
Possible cause	DTCs are stored in the EPS control module. Improper assembly of steering angle sensor Start stop unit malfunction
System wiring diagram	Not applicable