Diagnostic Procedure

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.

Step	Inspection		Action
1	VERIFY BCM DTCs AGAIN Clear the DTC for the BCM using the M-MDS. (Refer to CLEARING DTC [BCM] .) Switch the ignition ON (engine off or on) and wait for 5 s or more . Retrieve the BCM DTCs using the M-MDS. (Refer to DTC INSPECTION [BCM] .) Is the same DTC displayed?	Yes	Go to the next step.
1		No	Go to Step 5.
2	VERIFY FORWARD SENSING CAMERA (FSC) DTCs Retrieve the forward sensing camera (FSC) DTCs using the M-MDS. (Refer to DTC INSPECTION [FORWARD SENSING CAMERA (FSC)] .) Are any other DTCs displayed?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (Refer to DTC TABLE [FORWARD SENSING CAMERA (FSC)] .)
2		No	Go to the next step.
3	VERIFY IF MALFUNCTIONING LOCATION IS FORWARD SENSING CAMERA (FSC) DEPENDING ON REPEATABILITY Clear the DTC for the BCM using the M-MDS. (Refer to CLEARING DTC [BCM] .) Switch the ignition ON (engine off or on) and wait for 5 s or more . Retrieve the BCM DTCs using the M-MDS. (Refer to DTC INSPECTION [BCM] .) Is the same DTC displayed?	Yes	Replace the forward sensing camera (FSC), then go to the next step. (Refer to FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION .)
3		No	Go to Step 5.
4	VERIFY THAT REPAIRS HAVE BEEN COMPLETED Clear the DTC for the BCM using the M-MDS. (Refer to CLEARING DTC [BCM] .) Switch the ignition ON (engine off or on) and wait for 5 s or more . Retrieve the BCM DTCs using the M-MDS. (Refer to DTC INSPECTION [BCM] .) Is the same DTC displayed?	Yes	Repeat the inspection from Step 1. If the malfunction recurs, replace the BCM. (Refer to BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION .) Go to the next step.
4		No	Go to the next step.
5	VERIFY IF OTHER DTCs DISPLAYED Are any other DTCs displayed?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (Refer to DTC TABLE [BCM] .)
5		No	DTC troubleshooting completed.