Except Canada

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Do not select "Flexible" under the following driving conditions.
- The vehicle is used as a police car, taxi, or for driving instruction.
- The vehicle is driven under dusty conditions.
- The vehicle is idled or driven at low speeds for extended periods.
Using M-MDS
Connect the M-MDS to the DLC-2.
After vehicle identification is completed, select the following from the M-MDS initial screen.
- "Powertrain"
- "Engine Oil Maintenance Monitor"
- "Change setting"
Select "ON*1" or "OFF" from the M-MDS screen.

^*1When oil inspection/replacement is set to "ON", the engine oil deterioration condition is calculated based on the frequency of engine starts and the distance travelled. Because the engine oil deterioration condition cannot be calculated correctly if engine oil other than Mazda genuine oil (0W-20) or Castrol oil (0W-20) is used, use Mazda genuine oil (0W-20) or Castrol oil (0W-20) when setting the oil inspection/replacement to "ON".

Using center display

Switch the ignition ON (engine off or on).
Select [Applications] on the center display.
Select [Oil Change] on the center display.
Select the following items and change the setting.

Display of center display

Function

Initial setting

Setting contents

Control unit

Setting

Display (Fixed, Flexible)/non-display of the oil inspection/replacement can be set.

Off

Off/Fixed/Flexible⁽¹⁾

Connectivity master unit

Distance⁽²⁾

Distance to display of oil inspection/replacement can be set.

8, 000 km/5, 000 miles

0-99500 km (0-99750 miles)

Connectivity master unit

Oil Life⁽³⁾

Oil life to oil inspection/replacement can be displayed.

100%

Connectivity master unit

Reset

Maintenance monitor setting can be reset to the initial value.

Back

Back/Reset

Connectivity master unit

⁽¹⁾

When "Flexible" is selected, the engine oil deterioration condition is calculated based on the frequency of engine starts and the distance travelled. Because the engine oil deterioration condition cannot be calculated correctly if engine oil other than Mazda genuine oil (0W-20) or Castrol oil (0W-20) is used, use Mazda genuine oil (0W-20) or Castrol oil (0W-20) when selecting "Flexible".

⁽²⁾	If "Fixed" is selected in setting

⁽³⁾	If "Flexible" is selected in setting