LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-3 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Air Bag System (Service Information) - Two-Step Deployment Control System) >> Air Bag Module And Pre-TENSIONER Seat Belt Deployment Procedures >> Deployment Procedure for Outside of Vehicle >> Notes

Deployment Procedure for Outside of Vehicle: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the SST (Deployment tool)  . Refer to INSPECTION OF SST (DEPLOYMENT TOOL) .)
  2. Switch the ignition off.
  3. Disconnect the negative battery cable and wait for 1 min or more. Refer to NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  4. Follow the procedure below for operating (deploying) the applicable air bag module, pre-tensioner seat belt or lap pre-tensioner seat belt.
NOTE:
  • The connector part of the air bag module, pre-tensioner seat belt, and the SST (Adapter harness)  burns out from the high heat when the inflator is operated (deployed).
scientia non olet · About LEMON Manuals