Idle Speed Inspection

NOTE:

The idle speed cannot be adjusted.
The M-MDS is required to verify the idle speed.

Prepare for the engine tune-up. (See ENGINE TUNE-UP PREPARATION .)
Verify that the idle speed (M-MDS PID: RPM) is within the specification using the PID/data monitor function of the M-MDS. (See PCM INSPECTION .)
- If there is a malfunction, refer to "ENGINE SYMPTOM TROUBLESHOOTING". (See SYMPTOM DIAGNOSTIC INDEX .)
Idle speed (MTX: Neutral position, ATX: P position or N position)

MTX: 500-600 RPM

ATX: 700-800 RPM