LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-3 AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> On-Board Diagnostic - Engine Control (1 Of 5) >> DTC P0107-00: Map Sensor Circuit Low Input >> Related PIDs

Related PIDs

PID REFERENCE

Item (definition) Unit/Condition Definition Condition/Specification (Reference)
MAP KPa {MPA}, mBar {BAR}, psi, in H20 Manifold absolute pressure input from MAP sensor
  • Displays MAP
MAP_V V MAP sensor voltage
  • Ignition switched ON (engine off) (MAP:101 kPa {1.03 kgf/cm 2 , 14.6 psi}): Approx. 4.12 V
  • Idle (after warm up) (MAP: 33 kPa {0.34 kgf/cm 2 , 4.8 psi}): Approx. 1.9 V
  • Racing (engine speed is 2, 000 RPM) (MAP: 26 kPa {0.27 kgf/cm 2 , 3.8 psi}): Approx. 1.23 V


PID REFERENCE

Item Definition Unit Condition/Specification
MAP Manifold absolute pressure input from MAP sensor KPa {MPA}, mBar {BAR}, psi, in H20
  • Displays MAP
MAP_V MAP sensor voltage V
  • Ignition switched ON (engine off) (MAP:100 kPa {1.02 kgf/cm 2 , 14.5 psi}): Approx. 4.04 V
  • Idle (after warm up) (MAP: 35 kPa {0.36 kgf/cm 2 , 5.1 psi}): Approx. 1.40 V
  • Racing (engine speed is 2, 000 RPM) (MAP: 26 kPa {0.27 kgf/cm 2 , 3.8 psi}): Approx. 1.01 V